Project
Item No.
Quantity
Model E24 & E34
Electric Donut Fryer
STANDARD SPECIFICATIONS
CONSTRUCTION
ꢀ
ꢀ
Tank constructed of durable stainless steel with an
extra smooth peened finish for easy cleaning.
Immersion type; sealed construction heating
elements with high temperature alloy stainless
sheath.
ꢀ
ꢀ
Element design makes cleaning easy.
Provision for tie-in with fire protection systems.
CONTROLS
ꢀ
Temperature limit automatically shuts off all power
to the heating elements if the fryer temperature
exceeds the upper limit.
ꢀ
ꢀ
Three position switch (OFF/ON/START) for fryer
control.
Two position switch (MELT ON/MELT OFF) for melt
cycle control.
White power ON light.
Amber temperature light indicates when elements
are heating.
STANDARD ACCESSORIES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Tank - stainless steel construction
Cabinet - stainless front, door, back and sides
Electric Thermostat
On/Off Switch
Indicating lights
Drainboard (also used as fryer cover)
Hinged wire mesh submerger screen wtih safety grid
handles
ꢀ
ꢀ
OPERATIONS
ꢀ
Thermostat maintains temperature automatically at
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Two nickle plated wire mesh screens with handles
Wire mesh tube screen
6” (15.2 cm) legs adjustable
One drain extension
One drain line clean-out rod
Donut turner sticks (2)
selected temperature (between 200°F (93°C) and
400°F (204°C))
Front 1” NPT drain, for quick draining.
Selected fryer operating mode (on or melt cycle)
from the front control switch.
ꢀ
ꢀ
AVAILABLE OPTIONS & ACCESSORIES (At Additional Cost) APPROVALS
ꢀ
ꢀ
ꢀ
ꢀ
NSF Listed
MEA Approved
UL Listed
ꢁ Cover
ꢁ 6” (15.2 cm) adjustable casters, front locking
ꢁ Donut dropper bracket
(includes flanged bolt-down leg assembly)
ꢁ 480 Volt Service
CSA Certified
Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 •1509 Route 3A, Bow NH 03304, USA
L10-029 Rev 8 (06/07)
|